Regulation on Simple Pressure Vessels (2014/29/EC)
Official Journal Date : 3.11.2016
Official Journal Number : 29877
This Regulation shall apply to simple pressure vessels (‘vessels’) manufactured in series with the following characteristics:
(a) the vessels are welded, intended to be subjected to an internal gauge pressure greater than 0,5 bar and to contain air or nitrogen, and are not intended to be fired;
(b) the parts and assemblies contributing to the strength of the vessel under pressure are made either of non-alloy quality steel or of non-alloy aluminium or non-age hardening aluminium alloys;
(c) the vessel is made of either of the following elements:
(i) a cylindrical part of circular cross-section closed by outwardly dished and/or flat ends which revolve around the same axis as the cylindrical part;
(ii) two dished ends revolving around the same axis;
(d) the maximum working pressure of the vessel does not exceed 30 bar and the product of that pressure and the capacity of the vessel (PS × V) does not exceed 10 000 bar.L;
(e) the minimum working temperature is no lower than 50 °C and the maximum working temperature is not higher than 300 °C for steel and 100 °C for aluminium or aluminium alloy vessels.
Bu mevzuatın İngilizce tercümesi henüz hazır değildir, ancak talep etmeniz durmunda tercüme edebiliriz. Sağ tarafta bulunan formu doldurarak ilgili mevzuatın tercüme edilmesi için teklif talebinde bulunabilirsiniz.
Basit Basınçlı Kaplar Yönetmeliği (2014/29/AB)
Resmi Gazete Tarihi : 3.11.2016
Resmi Gazete Sayısı : 29877
Basit basınçlı kapların karşılamaları gereken temel sağlık ve güvenlik gereklerini, bu ürünlerle ilgili piyasaya arz koşullarını ve piyasa gözetimi ve denetimi esasları hk.